Event codes in VA7410

[Belmopán]

Hello,
We had a problem with one disk but the VA made his work and every thing is OK.
I'm trying an interpretation of the logs but I can't found the codes explanations.
Does somebody know where there is an explanation of the log?

We don't use CommandView... we work directly in the VA.

The entries are like this:

Event Type: 0x1
Sequence Number: 665972
Time Stamp: 6h:38m:47s, 10-11-2005
Module ID: 0x0ab
Controller SN: 00PP02D51025
Process ID: 0xffffffff
Slot: 0x0
Event Length: 0xb
Event Code: 0x1e9
Count: 0x1
Enclosure ID: 0x0
Slot: 0x0
Component: 0xff
Subcomponent: 0xff

Thank a lot

[Vincent Fleming · Accepted solution]

If I read this correctly, that's a abnormal termination due to firmware.

Here's a document that lists all the event codes.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg60194/lpg60194.pdf

Please upgrade to the latest release of FW, if you haven't yet.

Regards,

Vince

[Belmopán]

Thanks a lot; i gave me the source and the advice regarding the firmware.