Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
Showing results for 
Search instead for 
Did you mean: 

Extending Raid0 to Raid1

kevin whiteman
Occasional Visitor

Extending Raid0 to Raid1

Does any one have any experience of upgrading a single 9GB (Raid 0)to become a mirrored pair (RAID 1)? We have tried to do this under windows 2000 but reached an impasse where data loss was possible. Ideally I want to do this on the fly without having to rely on a backup. I have the Ingerated Smart Array controller in a compaq DL 360 and version 2.7 of compaq array configuration utility. Any experience or ideas would be greatly appreciated

Marino Meloni_1
Honored Contributor

Re: Extending Raid0 to Raid1

you just need to perform a raid migration at a hardware level, use ACU or ACU/XE in order to perform it. Migration is OS indipendent|Smart+Array+5i+Controller&source=TC021003TB.xml&dt=21&docid=12362