HPE Community
Disk Enclosures
1751712 Members
5187 Online
108781 Solutions
New Discussion

External Array

 
Ayman Altounji
Valued Contributor

‎03-09-2001 04:00 PM

‎03-09-2001 04:00 PM

External Array

This is an old array controller. It has 4 50-pin connections on board and no external connection. I can find no support for this card and am unsure about how to use it, how to access it or where to find drivers for it. I am trying to put it into a Proliant 5000 and had wanted to run an F1 tower array. With no external port is that not possible or could I connect via the 50 pin connections to another scsi card and use that external port?
Any information on how to use this card or set it up so at least the 4 internal drives are RAID array would be greatly appreciated.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎03-18-2001 04:00 PM

‎03-18-2001 04:00 PM

Re: External Array

That is not a "Smart SCSI Array"... I'll pretty much lay odds it's an old IDA or IDA-2 controller (IDE bases, totally incompatible to SCSI drives).
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.