Disk Enclosures
1748198 Members
2593 Online
108759 Solutions
New Discussion юеВ

FC10 and Brocade switches

 
SOLVED
Go to solution
Domenico Viggiani
Super Advisor

FC10 and Brocade switches

I have two SC10 JBODs to connect to two Brocade switches (a 2800 and a 2400).
When I tried, I got following error message storms:

0x10e6c360 (tThad): Nov 23 05:42:49
Error FW-CHANGED, 4, fabricFL000 (Fabric Fabric login) value has changed. current value : 2645 Login(s). (info)

I connected two JBODs according to following schema:

- First SC10:

2800
|
|
P E*
E** P------ 2400

- Second SC10:
P* E
E P**


Thanks in advance
Domenico Viggiani
2 REPLIES 2
Solution

Re: FC10 and Brocade switches

The FC10 support FC-AL attach only, NOT fabric logon - You need to enable QuickLoop support on your brocade switches. Type 'qlhelp' on the switch for commands on doing this.

HTH

Duncan

I am an HPE Employee
Accept or Kudo
Domenico Viggiani
Super Advisor

Re: FC10 and Brocade switches

OK. But, to understand better:
I already have two working DLT connected (as L ports) and I haven't Quickloop enabled.
Is it normal?

Thanks again