FC60 RAID 1 LUN NOT REBULING

[VINU]

Hi friends,

One of two disks of a Raid-1 lun on fc60 storage gone bad.The lun is in degarded state.We replaced the defective disk.But it is not rebuilding the lun.

The status of the replaced disk and another disk in 'amdsp' is given below,

SCSI Channel:ID = 4:1
Enclosure = 1
Slot (0-based) = 3
Disk State = FAILED--CAUSE UNKNOWN
Disk Group and Type = 09493400263B5825D0 LUN
Capacity = 0.0 GB
Manufacturer and Model = SEAGATE ST336704LC
Serial Number = 3CD1DZRX
Firmware Revision = HP03

SCSI Channel:ID = 1:2
Enclosure = 0
Slot (0-based) = 4
Disk State = OPTIMAL
Disk Group and Type = 094934002E3F0C6812 LUN
Capacity = 33.9 GB


In this case, what we have to do start the rebuild of the lun.

Thanks in advance

Vinu

[Bernhard Mueller · Accepted solution]

Vinu,

see http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=625216

Regards,
Bernhard

[VINU]

the document helped me,thanks

vinu