cancel
Showing results for 
Search instead for 
Did you mean: 

FC60 & LUN0

SOLVED
Go to solution
Robert Colloby
Occasional Visitor

FC60 & LUN0

Hi,
Can anyone help me ?
I've got an FC60 controller with 3 SC10's in a split bus configuration. We've had a power failure and when we powered back on, HPUX can't see the array at all. I've tried forcing the controllers to active mode but when I try to issue any commant to the array it fails. It looks like all references to LUN0 have been lost.

Anyone got any ideas ?

Regards,
Rob Colloby
2 REPLIES
kris rombauts
Honored Contributor
Solution

Re: FC60 & LUN0

Robert,

pls call HP support in for this, we can recover from this situation if their is a problem with LUN 0 but it requires an experienced engineer , their is some work to do via the serial port (shell) of the FC60 controllers.



Kris
Robert Colloby
Occasional Visitor

Re: FC60 & LUN0

Thanks Kris, That's what I was afraid of.

Rob