Disk Enclosures
1748200 Members
3880 Online
108759 Solutions
New Discussion юеВ

FC60 and IBM disks

 
Dave_359
New Member

FC60 and IBM disks

I have recently tried adding disks into one of our SC10 enclosures, they are IBM-ESXS disks (36Gb 15k rpm ultra320). These disks show up through sam as DISK LOCKED OUT and show as status...unsupported through STM.

When the enclosure is directly attached to our server we see the disks fine. DOes anyone know of a solution?
3 REPLIES 3
Darren Murray_1
Frequent Advisor

Re: FC60 and IBM disks

Dave,

Did you have any luck resolving this? I recently had a similar occurence.

Cheers
Daz
Dave_359
New Member

Re: FC60 and IBM disks

Are disks were 36GB 15k, the FC60 only likes certain size disks of a certain speed - check the docs and the speed of your disks.
ENeto
New Member

Re: FC60 and IBM disks

Dave, the IBM disk are not suported in FC60, because the version firmware ├Г┬мsn't HP. You need disk with HP firmware. I'm trying to break the firmware, and change to HP firmware, but not found tools to do it.