Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

FC60 and SC10 configuration guide ?

SOLVED
Go to solution
Dnack
Occasional Advisor

FC60 and SC10 configuration guide ?

where can i get the configuration guide from the hp website? btw, what utility do i used to configure raid for the above mention for W2k advance server clustered environment? fc array assistance?

Thank You
N
6 REPLIES
Xavier Gutierrez
Frequent Advisor

Re: FC60 and SC10 configuration guide ?

If you mean Hardware config guides, they're all HP Restricted, I think.

Regards,
Xavi
Live fast, die young!
Enes Dizdarevic
Honored Contributor

Re: FC60 and SC10 configuration guide ?

Cluster configuration guides for HP certified cluster configurations can be found on:
http://netserver.hp.com/products/high_availability/ms_supported_config.asp
This site IS public available. What is not public available is Installation guides (reserved for certified cluster installers, password protected). Checking this site (you can also check www.microsoft.com/hcl, search for: fc60 in: cluster) you can see that HP has certified FC60 for NT4.0 only, so appropriate configuration and installation guides for Win2K does not exist.

Note: When you check MS HCL for fc60, cluster you will find fc60 in Cluster/RAID System certified for Win2K. It means only that fc60 has passed cluster candidate tests but will be certified for clustering when a vendor gives complete configuration (including servers) for certification.
As far as I know HP does not have plans to support fc60 in win2k cluster environment.
napster_2
Occasional Visitor
Solution

Re: FC60 and SC10 configuration guide ?

Hi
from your link i can only managed to find some software download.
From the certified installer corner, i can only get the guide for RS12FC, but not sc10 with FC60. Can FCarray assistant be used to configure the raid?
Enes Dizdarevic
Honored Contributor

Re: FC60 and SC10 configuration guide ?

You can not use fcarray assistent to configure FC60. Fcarray assistent is for rs12fc. Software for configuring FC60 under windows is called HP storage manager 60 and I think it has to be bought separetely. Here is the link where you can find storage manager 60 manuals:http://www.hp.com/cposupport/manindex/hpsurestor19163_eng_man.html
Although the new version of storage manager 60 works with NT and Win2K HP does not suppo2k cluster, only NT cluster.
I do not know what is the problem with the link I give you in previous message. I have checked it: it points to certified configurations where you can select FC60 certified configuration and go to configuration manual (for NT40 only, as I explained.).
For your information: FC60 should be considered as obsolete product. It is not recommened to install new production windows systems using it, new product is Virtual array.

Insu Kim
Honored Contributor

Re: FC60 and SC10 configuration guide ?

http://www.hp.com/cposupport/manindex/hpsurestor19163_eng_man.html

You can click on "Storage Manager 60-NT Users Guide", "Storage Manager 60-NT Introduction Guide" and "Disk Array FC60 User's Guide (A5635A)".

Hope this helps,
Never say "no" first.
Dnack
Occasional Advisor

Re: FC60 and SC10 configuration guide ?

thank guys..help me alot