Disk Enclosures
1748148 Members
3683 Online
108758 Solutions
New Discussion юеВ

Re: FC60 and VxVM

 
Eugeny Brychkov
Honored Contributor

Re: FC60 and VxVM

From amdsp output I guess that WCA and CMA are not checked with 'X' for all LUNs. Do you have single-controller FC60? Any component failures? Why cache is not active?
Post amdsp -a here
Eugeny
Huber_4
New Member

Re: FC60 and VxVM

To reply to Gerrit : no I can't use full path. It is not accepted.
For Eugeny :
I do not have alternate paths because I do not have as many fiber channels as required. That's maybe the reason for what you noticed. Do you think this could be the origin of my problems ?
I enclose the output of ampsp -a.
Thanks.
Eugeny Brychkov
Honored Contributor

Re: FC60 and VxVM

Huber, your FC60 has very old firmware - HP01 (latest HP11), some BCCs are in unconscious state (may require replacement) and I recommend you to call HP asap for firmware upgrade and FC60 examination.
When you'll get FC60 in 'Ready' state only then we can talk about OS, patches and drivers.
Please keep me on track with your FC60
Eugeny