Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

FCIP (MPX110) setup

Javier Alonso Muro
Occasional Contributor

FCIP (MPX110) setup

Hi!

I have a test enviroment with two MPX110 FCIP gateways that I'm trying to install and configure so that I can get two EVA's to replicate to each other. I've been reading the tiny install guide.

and I follow the guide,but, i got this screen(Attach MPX110.JPG), its Ok?

where can I find a good Guide for this task?.

Thanks in advance.

4 REPLIES
Patrick Terlisten
Honored Contributor

Re: FCIP (MPX110) setup

Hello,

there is no screenshot attached to you posting.

Have you setup the switch ports properly, to which the FCIP gateways are connected? The ports should be online as E-Ports. When the ports are online, you need to configure the ip addresses of the GbE ports (local and remote on each side).

Best regards,
Patrick
Best regards,
Patrick
Javier Alonso Muro
Occasional Contributor

Re: FCIP (MPX110) setup

Sorry, here is the screen
Patrick Terlisten
Honored Contributor

Re: FCIP (MPX110) setup

Hello,

do you have setup the switch ports as described in the quick start guide? Do you setup the FCIP routes properly?

Best regards,
Patrick
Best regards,
Patrick