Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Failure to boot proliant 1600 after array configuration

Ayman Altounji
Valued Contributor

Failure to boot proliant 1600 after array configuration

The following the Error Message we get while trying to boot the system after running the Array Configuration Utility:

Array Ctrl bridge BARs configured Incorrectly by System ROM unrecognized xx Controller
Upgrade firmware on all Compaq Array
Controllers using options ROMPAQ
1 REPLY
Mark Cloutier
Respected Contributor

Re: Failure to boot proliant 1600 after array configuration

Please make sure that the smart array controller is on a different bus than any other PCI card.
We are here for a good time, not a long time!