Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Fibre channel connection

Roman_57
Occasional Contributor

Fibre channel connection

The following problem occurs. The HSV110 controller has detected an enclosure on the enclosure address bus that does not have a fibre channel connection. Corrective action code: 9b. We checked all connections, everything seems to be ok. Any suggestions? Thanks in advice.
2 REPLIES
Ruslan
Respected Contributor

Re: Fibre channel connection

Hi Roman!

There is fixed scheme for connection disk enclosures and HSV controllers to EAB
Ruslan
Respected Contributor

Re: Fibre channel connection

Note this information also...

The event log usually provides you with the enclosure and bay number of the disk
on which the event occurs. However, sometimes the data for the rack, drive
enclosure, and bay are invalid, leaving you with only the disk ALPA to identify it.
The following table correlates the ALPA (in hexadecimal) to the Loop ID (in
decimal as shown in the Command View EVA display) and to the enclosure
numbers and drive bay numbers in the rack

ALPA (hex) - Loop ID (dec) - Enclosure number - Drive bay number
9B - 47 - 5,12 - 6