Disk Enclosures
1745889 Members
5095 Online
108723 Solutions
New Discussion юеВ

From where we can find that disk is failed....in EVA

 
Ahmed Saleem
Advisor

From where we can find that disk is failed....in EVA

Hi
From where we can find that the Disk is failed in EVA, and for replacement which things are necessary. RAID level 5 is used.
Bye
4 REPLIES 4
Ranjith_5
Honored Contributor

Re: From where we can find that disk is failed....in EVA

Hi Saleem,

You can see this from Command View EVA.

Go in CV EVA go to HSV Storage Network and then go to Hardware and then go to disk enclosure and see the operational state.

You can see the individual status of the disk too from CV EVA.

Regards,
Syam
Ranjith_5
Honored Contributor

Re: From where we can find that disk is failed....in EVA

Hi Saleem,

If the disk is failed replace with another one immediately. You can do this online.

regards,
Syam
Ranjith_5
Honored Contributor

Re: From where we can find that disk is failed....in EVA

Hi,

I recommand you call HP-Engineer to replace the drive. You can idientify the prob and log a call with hp,because I dont think Hp will allow others to replace the spares of EVA. I guess your storage is under Warranty support with HP.


regards,
Syam
Nguyen Anh Tien
Honored Contributor

Re: From where we can find that disk is failed....in EVA

1)open Internet Browser (IE,,) choose Device-> Command View eva
refer attached pic file
2) Just unplug and plug new disk.
tienna
HP is simple