Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
Showing results for 
Search instead for 
Did you mean: 

Get the temperature of a HP SmartArray P410/250

Occasional Advisor

Get the temperature of a HP SmartArray P410/250

My server self-monitors and logs temperatures etc...




1a. Does the P410 have a temp sensor onboard?

1b. How does one retrieve the temperature?


2. How does one probe physical disks of a logical drive for individual temperatures?



P.S. This thread has been moved from Servers > General to Disk Array - HP Forums Moderator

Johan Guldmyr
Honored Contributor

Re: Get the temperature of a HP SmartArray P410/250


One way to get disk temps is out of the hp diagnostics. Perhaps the controller temperatures are in there too somewhere? I didn't look too closely.

If you run "hpacucli ctrl slot=4 diag file=/tmp/"

Then you get a zipfile, inside the zipfile are some files.
If you search for "Temperature" inside the ADUReport.txt file I can see several counters called "Current Temperature" that are non-zero (not 0x00). I presume these indicate the temperature of a disk in hex.

The counters are under this section in the ADUReport

Smart Array P411 in slot 1 : StorageWorks D2600 at Port 1E : Box 1 : Drive Cage on Port 1E : Physical Driv
e (2 TB SAS) 1E:1:2 : Physical Drive Status