HPE Community
Disk Enclosures
1753971 Members
7838 Online
108811 Solutions
New Discussion юеВ

.HAM driver for IntraNetware 4.11

 
Ayman Altounji
Valued Contributor

тАО01-06-2001 04:00 PM

тАО01-06-2001 04:00 PM

.HAM driver for IntraNetware 4.11

I have seen conflicting information on the Compaq support forums concerning the 53xx controllers and .HAM drivers for IntraNetware 4.11. The ML370 folks say the CPQRAID.HAM that comes with SSD 6.10 (or later) works with Netware 4.11.

Is this correct or not. I need to buy a number of Compaq servers that need to run Netware 4.11 and would like to use the 5302 controllers.

Help!
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

тАО04-03-2001 04:00 PM

тАО04-03-2001 04:00 PM

Re: .HAM driver for IntraNetware 4.11

Controller is not supported under NW 4.11 .....
0 Kudos
Reply
Ayman Altounji
Valued Contributor

тАО06-12-2001 04:00 PM

тАО06-12-2001 04:00 PM

Re: .HAM driver for IntraNetware 4.11

currently we are running, the 5302/64 controller in our netware4.11 environment,with great success. We have it installed and are using the cpqraid driver
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.