Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

HD or Controller failure

Kevin Burd
Occasional Contributor

HD or Controller failure

clustered 6 disk raid 5. One HD shows red-x light like it failed. Controller 1 (of 2) shows ! amber alert light. in cr3500 util, the problem HD has disappeared from channel 0, target location. Replaced it, no light at all on the HD, so put the old one back in...now no red-x or any light at all on that specific HD. Controller hasnt failed over...controller mode: Active/Active ...Failover mode: Active/Active.
How do I manually transfer it over to controller 2?
Any help appreciated