HP 2012FC new HDD

[Bpeg]

Whether we can insert new hard disk ST3300657SS. Before stood ST3300655SS

[Johan Guldmyr]

Does it have the same HP spare part number?

Then yes you can insert the new model number.

[Bpeg]

And if part nubmer isn't present?

Models almost identical. Where it is possible to learn about compatibility?

[Johan Guldmyr · Accepted solution]

It should have HP spare part numbers no it - or it is not an HP part :)

Maybe the model number will be the same on a non-hp one, but will the firmware be supported?

Anyway.

At the top of this page, click on "support and drivers" - then in the search box on that page, search for ST3300657SS.

That will give you several downloads for firmwares for MSA2000/P2000 for that model number.

I am not aware of a document listing all the supported models for MSA2000/P2000 series.

But if you go to a download as advised above, then click on 'release notes' you'll get a link to an ftp with some drives/firmwares.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-d4207dddcdf14ba29020ce2937〈=en&cc=us&idx=2&mode=4&

[Bpeg]

Part number of ST3300655SS - 9Z1066-883
New HDD ST3300657SS - i don't know.

But if to trust given with the link, all should work.

Thanks.

[Johan Guldmyr]

OK, that number is not an HP spare part number.

Are the disks HP labled?

Also don' forget to give points to answers :)

[Bpeg]

Old disks marked HP.
But one disk has died. And now it is necessary replaces it.

If I have correctly understood that is spare, part nubmer AJ750A.

[Johan Guldmyr]

Ah, great.

AJ750A is the option number of the whole MSA.

http://partsurfer.hp.com/Search.aspx?SearchText=AJ750A

You can use to find spare parts for it.