1745832 Members
4206 Online
108723 Solutions
New Discussion юеВ

HP EVA

 
SOLVED
Go to solution
sukhvinder
New Member

HP EVA

Can we see host HBA using Command View even witout putting Host entry manually in EVA(ofcourse the zoning is already done on the switch..)
3 REPLIES 3
Luk Vandenbussche
Honored Contributor

Re: HP EVA

If your management appliance is in other zone you cannot see it. It is best to put your appliance in an other zone. So you cannot see it.
Stephen Kebbell
Honored Contributor
Solution

Re: HP EVA

If your Host is zoned correctly to the EVA, then you will see the WWN of the HBA available in a drop-down list when you define the Host in Command View. You should not have to type it in then.

Regards,
Stephen
sukhvinder
New Member

Re: HP EVA

I found the answer in secon reply..its the exact explanation