Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

HP MSA / P 2000 G3/VDISK QTOF/RAID 5 /Multiple disk failure/One disk Leftover

pansee517
Occasional Contributor

HP MSA / P 2000 G3/VDISK QTOF/RAID 5 /Multiple disk failure/One disk Leftover

Hi,

We have MSA which is part of large filesytem of 40 TB. We have poberved that one of the disks is shown as LEFTOVER (1.6) disk with health is Degraded and error as " A previously missing disk has been detected. Recommended action: Refer to 'Troubleshooting Steps for Leftover Drives' in the HP MSA2000/P2000 Guided Troubleshooting Best Practices." 

Other disk is failed  with excessive medium error. It happened simulteneously. It is RAID 5 with one hot spare (10d+1P+1sp). Now the state of the VDISK is QTOF and it goes for continuous reconstruction. Once the so called reconstruction is finished (100 %), it start again with 1% and it just goes on. What show be done in this situation?

Please help

1 REPLY
giladzzz
Honored Contributor

Re: HP MSA / P 2000 G3/VDISK QTOF/RAID 5 /Multiple disk failure/One disk Leftover

hi

If you have a failed disk replace it and reconstruct will continue

if not your only option is to use the TRUST command but this is a 

last resort solution. I would suggest speeking with HPE support

first.

Regards