Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

HP MSA1000 GUI

VigneshKadirvel
Occasional Visitor

HP MSA1000 GUI

Hello Admins,

 

I am new to HP storage, in my enviorment i got an request for to extend the existing lun in HP MSA1000.

 

Which is DAS. so i tried login from server end but i am not sure where i need to go to get into that array.

 

Can you guys help me where should i approach from server end and how do i extend the existing lun through GUI.

 

 

Thanks in Advance

 

 

Regards,

Vignesh Kadivel

 

 

4 REPLIES
StorageMike
HPE Pro

Re: HP MSA1000 GUI

Hi Vignesh

 

As long as the Proliant Support pack is installed you should be able to configure the MS1000 via the array configuration utility (ACU) in the same way you would configure an internal raid set.

 

Thanks

I work for HP

Click on the Kudos star if you think this post was useful :)
StorageMike
HPE Pro

Re: HP MSA1000 GUI

Sorry meant to include the following link

 

http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=377751&ac.admitted=1379060542529.876444892.492883150

I work for HP

Click on the Kudos star if you think this post was useful :)
VigneshKadirvel
Occasional Visitor

Re: HP MSA1000 GUI

what is the default faul tolerance level for HP MSA1000 while creating logical drive also what is the stripe size?

 

Torsten.
Acclaimed Contributor

Re: HP MSA1000 GUI

It is up to you if you want to use RAID 1 or 5.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!