Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 6.2 and managing EVAS

ACHCHGUY
Frequent Advisor

HP SIM 6.2 and managing EVAS

Hi all,

Sorry for the silly simple question.
I had a document which covered the steps you needed to do, to add evas into HP SIMso you could alert on and report on the evas.

I am rebuilding a new HP SIM 6.2 Install and want to add all the evas....but can not locate the document that had the steps you needed to cover off.
From memory there were text files in HP SIM you had to modify etc.

IF some one could post a link that would be great
Cheers
Steve
3 REPLIES
Sudhakar Subramaniam
Trusted Contributor

Re: HP SIM 6.2 and managing EVAS

You can do this by using the below docs

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02537452/c02537452.pdf

refer Loading the HSV MIB on the CMS for EVA
Torsten.
Acclaimed Contributor

Re: HP SIM 6.2 and managing EVAS

See chapter

12 Requirements for EVA Supportability with HP Insight Remote Support Advanced

in

HP Insight Remote Support Advanced
A.05.50 Managed Systems Guide

(c02474021)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MasterBlaster
Occasional Advisor

Re: HP SIM 6.2 and managing EVAS

Hi,

 

All I did was go into commandview and set up a trust arrangement with the SIM server and it populated my EVA's.

I didn't amend any scripts and it shows me my eva's and their configuration.

 

regards