HP SIM 6.2 and managing EVAS

[ACHCHGUY]

Hi all,

Sorry for the silly simple question.
I had a document which covered the steps you needed to do, to add evas into HP SIMso you could alert on and report on the evas.

I am rebuilding a new HP SIM 6.2 Install and want to add all the evas....but can not locate the document that had the steps you needed to cover off.
From memory there were text files in HP SIM you had to modify etc.

IF some one could post a link that would be great
Cheers
Steve

[Sudhakar Subramaniam]

You can do this by using the below docs

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02537452/c02537452.pdf

refer Loading the HSV MIB on the CMS for EVA

[Torsten.]

See chapter

12 Requirements for EVA Supportability with HP Insight Remote Support Advanced

in

HP Insight Remote Support Advanced
A.05.50 Managed Systems Guide

(c02474021)

[MasterBlaster]

Hi,

All I did was go into commandview and set up a trust arrangement with the SIM server and it populated my EVA's.

I didn't amend any scripts and it shows me my eva's and their configuration.

regards