Disk Enclosures
1748181 Members
4120 Online
108759 Solutions
New Discussion

Re: HP Storageworks MSA 30 DB Storage to SGI Octane2

 

Re: HP Storageworks MSA 30 DB Storage to SGI Octane2

Yes the main boot drive is on the same controller, How can I change the SCSI IDS that the drive-shelf is using?

The docs, that I can find, do not give me that info.

thanks again for helping.

Torsten.
Acclaimed Contributor

Re: HP Storageworks MSA 30 DB Storage to SGI Octane2

You cannot - ID's are fixed.

From left to right for DB module:

0 1 2 3 4 5 8 - 0 1 2 3 4 5 8

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!