Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

HP VA 7400 Controller Card Replacement

dinil
Occasional Contributor

HP VA 7400 Controller Card Replacement

Dear Freinds

I am facing a problem in HPVA 7400 - Having Controller Card Faulty and Power Supply Fault

Servers : hp 9000 rp 5470 - 3 Nos
HP SAN Switch with 8 Port
HP VA 7400 diwth Dual Controller - 512 MB

I faced the controler card problem - server were hung while replacing . So i decided to continue with Old Controller - but when i am starting the Application with single controller which was woking fine( I/Os on the Storage), it is giving following errors in the syslog and server goes hung state - pls help

1. LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.
LVM: Recovered Path (device 0x1f040200) to PV 0 in VG 2.
LVM: Restored PV 0 to VG 2.

All disks are shown included and LUNs are availabale and mounted state

Thanks in advance .

1 REPLY
goldboy
Trusted Contributor

Re: HP VA 7400 Controller Card Replacement

dinil,
it seems as if you have a bad disk in the array.
how do you check the disk status ? are you using command view ?

Tal
"Life is what you make out of them!"