Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

HP VA7100 CLI reference guide

SOLVED
Go to solution
Patrick Terlisten
Honored Contributor

HP VA7100 CLI reference guide

Hello,

I'm searching for a CLI reference for the HP VA storage arrays? Is there any PDF?

Regards,
Patrick
Best regards,
Patrick
4 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: HP VA7100 CLI reference guide

I don't remember if there was any.

I normally used the VFP CLI for creating LUN0 and very basic troubleshooting only.
Better to use command view.


You can get basic help like this:

Ready > help

For help with a command, use the -? option (e.g. vfpsetup -?).

setup Performs Virtual Front Panel configuration.
dsp Displays subsystem status.
cfg Performs subsystem configuration.
mgr Performs subsystem management operations.
fmt Performs a subsystem format.
rbld Performs rebuild operations.
recover Performs NVRAM recovery operations.
secure Performs LUN Security operations.
log Displays event logs



Ready > dsp -?



Displays subsystem status.


Usage:

dsp [-c ] [-d ] [-e ] [-f]

[-L ] [-s] [-?]


-c: Displays controller information.

-d: Displays disk information.

-e: Displays enclosure information.

-f: Displays a listing of FRUs in the array.

-L: Displays LUN information.

-s: Displays subsystem status, warnings, and

subsystem parameter information for the array.

-?: Displays help.





Or are you looking for command view cli commands? They are all in the CV SDM user guide.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Patrick Terlisten
Honored Contributor

Re: HP VA7100 CLI reference guide

Hello,

my fault, I searched for a CLI guide, but the arm-commands were in the CV SDM guide. Thanks for that hint!

http://www.dectrader.com/docs/set3/c00300018.pdf

Regards,
Patrick
Best regards,
Patrick
Torsten.
Acclaimed Contributor

Re: HP VA7100 CLI reference guide

Found something deep inside the directory tree ... see attachment.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: HP VA7100 CLI reference guide

Ok, you searched for CV SDM arm commands.

If unsure about usage, try cvui. The command line used for the selected command is printed at the bottom of the screen.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!