HPE Community
Disk Enclosures
1753903 Members
9960 Online
108810 Solutions
New Discussion

Re: HP VA7410 Disk Array Configuration

 
Unix Sysadm
Occasional Contributor

‎08-20-2004 02:47 AM

‎08-20-2004 02:47 AM

HP VA7410 Disk Array Configuration

We have 2 x VA7410 disk arrays. 1 primary and it's mirror.
Within the current configuration there is an unused 25GB LUN
with 4 paths leading to each array.
We would like to split this LUN (LUN 7) into 2 LUNS one of 10GB
and the other 15GB.
What do we need to do to get to this configuration ?
0 Kudos
Reply
1 REPLY 1
Slawomir Gora
Honored Contributor

‎08-20-2004 08:24 AM

‎08-20-2004 08:24 AM

Re: HP VA7410 Disk Array Configuration

Hi,

you have to remove LUN7 and create two new LUNS

new LUNS you can add and del by armcfg command:

ex. add:

armcfg -L 7 -a 10000 -g 1 alias_of_va_array

-g - redundancy group number


0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.