HPE Community
Disk Enclosures
1753593 Members
6531 Online
108796 Solutions
New Discussion

HSV110 VCS Firmware Upgrade

 
SCSI Error
Regular Advisor

‎04-14-2010 09:36 PM

‎04-14-2010 09:36 PM

HSV110 VCS Firmware Upgrade

Hi,

I'm going to upgrade my EVA5000(HSV110) from 3.028 to 3.110

Does the password reset can be skipped in the procedure? p. 53

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01656193/c01656193.pdf

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-14-2010 09:43 PM

‎04-14-2010 09:43 PM

Re: HSV110 VCS Firmware Upgrade

If there was never a password set on Operator Control Panel you can skip this step.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.