HPE Community
Disk Enclosures
1753767 Members
5661 Online
108799 Solutions
New Discussion

Help with SC10 connection

 
Krish_4
Contributor

‎03-29-2005 11:54 AM

‎03-29-2005 11:54 AM

Help with SC10 connection

Hi,

We want to connect SC10(single bus mode) disk system to A500 hardware. How should be the connection made? A500 has just one scsi port. SC10 has 4 scsi ports. How about the termination? Any help is appreciated.

Thanks.
0 Kudos
Reply
1 REPLY 1
Adisuria Wangsadinata_1
Honored Contributor

‎03-29-2005 05:47 PM

‎03-29-2005 05:47 PM

Re: Help with SC10 connection

Hi Krish,

You can connect the SCSI cable from A500 SCSI port (LVD) to one of the SCSI port on BCC A (Bus Controller Card). And the other port on BCC A with terminator. The maximum cable is 12 meters.

This configuration will make a single bus mode with non-redundant features.

Hope this information can help you.

Cheers,
Adisuria Wangsadinata
now working, next not working ... that's unix
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.