Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

How can I get the picture of the electronic outlet of EVA 4000

Wang,MinJie
Super Advisor

How can I get the picture of the electronic outlet of EVA 4000

Hi all
I've searched EVA documents for hours and I haven't got a document containing the picture of the electronic outlet
Can you help me?
3 REPLIES
Rob Leadbeater
Honored Contributor

Re: How can I get the picture of the electronic outlet of EVA 4000

Hi,

What do you mean by electronic outlet ??

The power input leads are normally IEC-309 32 Amp connectors (although this may vary by country).

The connections to the SAN (Fibre Channel) are standard LC connectors.

Attached is a picture of the power outlet.

Cheers,

Rob
Rob Leadbeater
Honored Contributor

Re: How can I get the picture of the electronic outlet of EVA 4000

The fibre connectors are as per the attached picture.

Cheers,

Rob
Ted Buis
Honored Contributor

Re: How can I get the picture of the electronic outlet of EVA 4000

The EVA4000 components have power recepticles (C13/C14) that connect to PDUs in the rack. The PDU and its power connector that comes out of the rack (assuming it is a HP factory racked configuration) depends on the country.
AC plug type
(quantity 2)
North America-3 wire NEMA No. L6-30P, 30 Amp (208 to 240V, 50-60Hz 30A)
Europe - 3 wire, 2 pole IEC 309, 30 amp, (220 to 240V 50Hz 32A)
The default can be overridden, so you really have to look at which PDU was ordered.
I the US, I typically use two D252663-D72 PDUs each with 28 C13 outlets and a NEMA L6-30P power cord. It would connect to an L6-30R recepticle.

The attached file has pictures.
Mom 6