How can change Lun's ID?

[Morda_1]

I have MSA2000fc. I have changed the owner of virual disk, but how can I reassign LUN for some volumes? I couldn't find this information in manuals.

[Greybeard]

Volume Mapping Syntax
You can specify the controller host ports and LUN to use in a volume mapping by
using the syntax ports.LUN.
â   ports can be a controller host port identifier, a comma-separated list of port
identifiers, or a hyphenated range of port identifiers, or a combination of these.
â   For SAS, a port identifier is a controller ID (a, A, b, or B) and port number.
Examples:
a0
a0-a1
A0,A1,B0,B1
A0-A1,B0-B1
Do not mix controller IDs in a range; for example, A0-B1.
â   For FC and iSCSI, a port identifier is a single digit. Specified ports must be
located on the controller that owns the volume's virtual disk. Examples:
0
0,1
0-1
â   LUN is a logical unit number from 0â 127 (FC and iSCSI) or 0-255 (SAS only) to
assign to the mapping.
Examples:
â   On a SAS system, to map controller A ports 0 and 1 with LUN 8, specify:
â   On an FC or iSCSI system, to map a volume owned by controller A using its
ports 0 and 1 with LUN 8, specify:
a0-a1.8
0-1.8

the CLI manual lives here: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01505833/c01505833.pdf

[Morda_1]

No. I'm talking about other thing. When I changed the owner LUN lost! And now I have information about this volume is "


Volume Name Volume_name
Belongs to Virtual Disk Office_Vir_Disk
Volume Presented Globally? No
Volume Size 90000 MBytes
Percent of Total Virtual Disk 9.9%"

I talking about the string is "Volume Presented Globally? No". How can I set new LUN?