Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

How can i know everything about my EVA

SOLVED
Go to solution
Geyson
Advisor

How can i know everything about my EVA

Hi guys,

How Can i know the version of my EVA?, my controllers version are HSV200.

If you need more, you can ask and tall me how to do it.

thanks in advanced for a satisfactory solution.
7 REPLIES
P Muralidhar Kini
Honored Contributor

Re: How can i know everything about my EVA

Hi Geyson,

Is this what you are looking for -
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1263107

Regards,
Murali
Let There Be Rock - AC/DC
P Muralidhar Kini
Honored Contributor

Re: How can i know everything about my EVA

Hi Geyson,

To monitor EVA -
http://h18000.www1.hp.com/products/storage/software/cmdvieweva/qa.html

Regards,
Murali
Let There Be Rock - AC/DC
Nader Qaid A.
Frequent Advisor

Re: How can i know everything about my EVA

connect the managment port of your controller you may open the webbased managment of it with browsing the defult IP address http://192.168.0.1
the username is admin and no password.

you will find all iformation about your eva in.


Enterprise Servers and Storages Engineer
Nader Qaid A.
Frequent Advisor

Re: How can i know everything about my EVA

if it didn't work try
https://192.168.0.1:2373
Enterprise Servers and Storages Engineer
Víctor Cespón
Honored Contributor
Solution

Re: How can i know everything about my EVA

Nader: It's and EVA4000 or 6000, no 4400, there's no management module.

Geyson: Hardware - Rack 1 - Controller enclosure - Controller A - Software version

That's the firmware version of the EVA


Hardware - Rack 1 - Controller enclosure - Controller A - device ports

If there's a 3xx switch there, then it's an EVA6000, if not, it's an EVA4000
Geyson
Advisor

Re: How can i know everything about my EVA

Thanks to all, i found what i want my version y 6000
Víctor Cespón
Honored Contributor

Re: How can i know everything about my EVA

XCS 6.000 is unsupported since December 31, 2007. Update to XCS 6.220 and Command View 9.2.