How connect the AutoRAID 12H to HP9000 D200?

[nkkorhaz]

Hi All!,

HP SureStore E, DiskArray 12H (AutoRAID).

Now this AutoRAID connecting to the HP9000 D390 server. I'd like this AutoRAID unconnect from D390 and i'd like connect to K200 server.
What is be done after?

thnx!

--
mezi

[Eugeny Brychkov]

Mezi,
you should connect 12h to HVD SCSI card(s) installed in K-server. Then LUNs will appear in the ioscan output. To manage array, you should install its software (hparray software), and maybe some patches
Eueny

[paul courry]

Tools for autoraid are kept in /opt/hparray/bin

[nkkorhaz]

so,
0) shutdown the d390
1) shutdown the autoraid 12h
2) unconnect 12h from d390
3) connect 12h to k200
4) start the k200
5) /sbin/init.d/hparray start ? ? ?
6) mounting ? ? ?

this process working?

(i'm full lame the hp servers, sorry :()

--
mezi

[Eugeny Brychkov · Accepted solution]

Add 'start autoraid' before starting server (step 4); To start autoraid management software type '/sbin/init.d/hparray start'; If this command will fail then you may need to install autoraid management software (located on one of CDs shipped with OS); If you have hpux volume groups created within the autoraid then run vgimport command to import these volumes into k200.
Notes: a) before doing it make sure you have autoraid data backed up; b) please make sure that all systems are grounded properly before disconnecting/connecting hardware
Eugeny