Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I configure a new SATA disk on a HP Proliant ML150

David_pe
Occasional Visitor

How do I configure a new SATA disk on a HP Proliant ML150

HI everybody I'm new on using HP Proliant servers, I have bought a new one and I'm configuring it, I have installed two SATA hot plug disks and now I want to install the OS but doesn't recognize any HD, how do I configure them, to make the MB recognize them, thanks a lot, bye.

David
1 REPLY
Leon Rosier
Respected Contributor

Re: How do I configure a new SATA disk on a HP Proliant ML150

I guess you have the 6-port SATA raid controller installed? If so, during start up press F9 to go into setup and set the bootcontroller order.
After this is done, during reboot press Ctrl-A to enter the raid utility and here you can configure the logical drives.

Gr, Leon