How find WWN and Checksum Eva4000/hsv200?

[Ashkan_1]

Hi All

I lost WWN And Checksum For eva4000/hsv200.

how recover it for initisaliz?

i have wwn for on of the controller (i have screenshot from windows)but i have not checksum.

How recover checksum?

thank you.

[giladzzz]

Hi

If you just un-initionlize  and then initionlize again with out powering of

you don't need the checksum.

If you un-initionlize and then power off you need to input the WWWN and CS

before you can initionlize

Regards

press the kudos star if you liked

[Ashkan_1]

my sitution is

"If you un-initionlize and then power off you need to input the WWWN and CS

before you can initionlize"

But I lost wwn + checksum Lable On The Rack . i Have just WWN .

HOW Recover Cheksum?

Thx

[giladzzz]

Hi

Is your  EVA working and you want to reset it or do you have to set it up as a new system

because then you need WWWN and CS and also you need licenses.

If it is working you don't need checksum.

Regards

[Ashkan_1]

hi giladzzz,
my eva 4000 (with 2 hsv 200+4 M5314 Enclosure+ hp san switch 8\24) dose't work for 1 year .
i want intial it. but i have not cheksum. i have just cheksum(that captured from windows scrennshot). so you know wwn And checksum printed on small label that stick on rack. but this lable missed.

so how find/recover checksum?

and i have server that command view was install and used with system when the eva was working 1 year ago and i dont have any change on ths server.


so How do I do?

[Ashkan_1]

I have  wwn  And SeriaL Number  hsv 200 (1) and hsv 200 (2) , but i have not checksum !!!

and my warranty is Over .

hp chat online Not support me. because when i enter SN (hsv 200) hp site said me: my warranty is not valid  !!!

Plz guide me, If U can.

Thx

[Ashkan_1]

Hp support team Plz guide me.

I want Checksum for my eva 4100 with hsv 200. (model:2C4D)

I have WWN AND SN.

But i Want Checksum .

[giladzzz]

Hi

If you can power on the EVA and it comes up OK you don't need WWWN and CS but if it dosn't come up

you also need licenses

Regards

[Ashkan_1]

hi giladzzz,

when i power on eva I see in HSV200 Lcd :for Initalizing enter WWN => enter Checksum.

So , i had lic because eva worked 1 year ago

and i have server that installed command viewe on it but for using Command view i have administrator

but i don't have password Command view .

how find command view pass?

and can i use trial lic ?


another problem is both of cach battery are fault. Orange led is On. can i use it without cach battery permanently.

regards

[giladzzz]

Hi

I will try to answer all your questions

1) If when you power on you have to enter WWWN this meens there is no configuration on the disks and you need WWWN and CS

2) if you have command view server it meens that you still have the license file on the server it is in

C:\Program Files (x86)\Common Files\Hewlett-Packard\HPOvLIC\data\LicFile.txt      but you still need the CS I can't help you there

3) to login to command view any user that is the local group "HP Storage Admins" can login to command view

4) if you install command view on a new server you get 60 days trial license.

5) if the cache batteries don't work you will not be able to export disks this meens you can't work with the EVA. you need al least one good battery.

Regards