Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

How to start RMI server on command view XP

benseghir_1
Advisor

How to start RMI server on command view XP

Hi all,

I try to connect to my XP128 using command view and I have the error message cannot connect verify that the RMI server is running, when i verify i found that it is down, please how can I start the RMI server on command view

Best Regards,
Hassiba.
2 REPLIES
IBaltay
Honored Contributor

Re: How to start RMI server on command view XP

Hi,
here are some troubleshooting ideas from the CVXP installation guide:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00595555/c00595555.pdf

1. disable the Web Proxy service (p 32).
2. security settings (Java.policy file,p 49)

If this does not help, you can check also the following links:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64179&taskId=110&prodTypeId=18964&prodSeriesId=64820

OR
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=64820&prodTypeId=18964&objectID=c01372644#A3




the pain is one part of the reality
Abdul Jaffar
Occasional Advisor

Re: How to start RMI server on command view XP

Hi Hassiba ,

You can stop the command view xp services from server where it is installed .

Regds,
Jaffar
Live to Learn