Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp smart array b110i not recognize Seagate 3tb

SOLVED
Go to solution
Joepkke
Occasional Contributor

Hp smart array b110i not recognize Seagate 3tb

Hello,

 

Seagate 3tb is not recognized by the controller..

 

Disk model: st3000md001

Array controller: B110i

 

In the array configuration on boot up is recognize only 800 gb.

and in windows array configuration it gives status failed

 

 

Does somebody have a solution for me?

 

Thanks

 

 

5 REPLIES
Mark Matthews
Respected Contributor
Solution

Re: Hp smart array b110i not recognize Seagate 3tb

Please see the below link...

Page 4, last NOTE under the storage controller section.

 

http://h18000.www1.hp.com/products/quickspecs/13247_div/13247_div.PDF


Thanks

Mark...

 

 


---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
Med-H
HPE Pro

Re: Hp smart array b110i not recognize Seagate 3tb

Hi,

 

The HP Smart Array B110i does not support greater than 2TB hard drive that why 3TB is not recognized.

 

I advise you to use HP hard drives not Seagate.

 

Please see the below link..

 

http://h18000.www1.hp.com/products/quickspecs/13247_div/13247_div.PDF

I am an HP employee
Retroru
Occasional Visitor

Re: Hp smart array b110i not recognize Seagate 3tb

Hi, I have the same situation , purchased a server with this controller, and two 3TB disks. Any idea if it is possible to do something to the controller, that it starts support disks of 3Tb ?

 

If it will have to be replacement ,what controller model  will support 3Tb, that would be compatible with server

HP ProLiant DL160 Generation 6 ?

 

Thank you,

 

 

GMZ
Frequent Visitor

Re: Hp smart array b110i not recognize Seagate 3tb

Hi Retroru, Did you find a controller for your 2 x 3TB drives?

BK_HPE
LSW

Re: Hp smart array b110i not recognize Seagate 3tb

Hello @Joepkke

 

According to the HP ProLiant DL160 Gen6 QucikSpecs page 18 HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller (462862-B21) is compatible with the HP ProLiant DL160Gen6.  According to page 13 of the HP Smart Array P410 Controller QuickSpecs says this controller is compatible up to 4TB drives.

 

I hope this information is helpful and please let me know if you would like to take advantage of talking to an HP Server Specialist to see if there may be any other options.

I am an HP employee in the ISS, Storage and Networking group, and I love helping our customers. If my post helps you, please mark it as an Accepted Solution. If you need further insight into HP Solutions, please send me a private message or contact an HP Solutions Expert.