Identify Firmware Version

[SCSI Error]

Hi,

From the ADU report output. How can I check the Firmware version of my MSA 1000 and MSA20 ?

Anyone help? is there a way to identify firmware other than ADU?

[IBaltay · Accepted solution]

Hi,
a) if you are next to the MSA and you have the serial cable, you can get it via the CLI command show version
b) if you are remote, you can have it via ACU GUI or CLI - controller wwn=xy show

[SCSI Error]

how about the MSA20?

[IBaltay]

here you could find any usable information:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01183956/c01183956.pdf?jumpid=reg_R1002_USEN

The firmware flash utility does the discovery and shows you the current MSA1000/MSA20 controllers firmware versions...

[IBaltay]

This could help you too:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01526326/c01526326.pdf?jumpid=reg_R1002_USEN

[IBaltay]

to have it all - the fresh new firwmares from the 5th of May 2009 are here:

latest flash for A/P MSA1000
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=co-70650-1&jumpid=reg_R1002_USEN
(fixes the problem of the 12x1TB SATA disks)


latest flash for A/A MSA1000
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=co-70649-1&jumpid=reg_R1002_USEN