Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Initial Configuration of VA7110

SOLVED
Go to solution
Manoj Sivan
Regular Advisor

Initial Configuration of VA7110

Hi All,

We have procured one VA7110 (HP VA7110 Disk Array with 15 x 146 GB drives ) Array. Due to some reasons i cant involve HP CS support in this. So can any one guide me how to configure the same. The server connected in rp4440. We are planning Raid 1 on the array. Can any one help me in this. Many thanks in advance.

Cheers

Manoj
4 REPLIES
Jan de Haas_3
Frequent Advisor

Re: Initial Configuration of VA7110

Hi Manoj,

The following link should give you all info you need to configure the VA7110!

http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12169&prodSeriesId=298817

Cheers,

Jan.
Thayanidhi
Honored Contributor
Solution

Re: Initial Configuration of VA7110

Hi,

You have to install CV-SDM in the hp-ux host (1.07 or above). Then run the arm commands to admin.

Inititally you can use the serial interface to format the array and create lun-0 (lun0 is a must, create a small lun and leave it unconfigured)

VA is very simple, you don't need to mention host/presentation. All luns are accesible by all servers! Remember to mention the host type as hp-ux when creating the lun.

Regds
TT
Attitude (not aptitude) determines altitude.
Nguyen Anh Tien
Honored Contributor

Re: Initial Configuration of VA7110

Manoj Sivan
Regular Advisor

Re: Initial Configuration of VA7110

Hi All,

Thanx a lot for the info provided. I am able to configure it now.

Once again thanks.

Cheers

Manu