Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation NetRAID-1M on HP LC2000

Dragan Dujin
Occasional Visitor

Installation NetRAID-1M on HP LC2000

I installed NetRAID-1M, updated firmware and when I try to install Windows 2000 server, I could not. Without NetRAID I had not any problem. When I start Diagnostics, I've got that system board is failed.
If I try to install Windows 2000 I've get blue screen.
Thanks
Dragan
2 REPLIES
Franco Cenati
Valued Contributor

Re: Installation NetRAID-1M on HP LC2000

Try to see if this is your case

An issue about NetRAID 1M and disc drive firmware at
http://netserver.hp.com/netserver/support/hot_news/hot_news.asp

Franco
William Brown
Occasional Visitor

Re: Installation NetRAID-1M on HP LC2000

Have you got this working yet? I am new to HP hardware but the drivers don't seem available. I was supplied with Navigator L19 which does not support the NetRAID 1M. I also tried to download drivers from http://www.hp.com/cposupport/servers/software/lc2000drvw2k.exe.html but I can't get these to install during setup. There is a copy of Navigator L20 in the post for me. Will this have the drivers I need? Do HP often ship hardware without software?

William Brown