Disk Enclosures
1748239 Members
3843 Online
108759 Solutions
New Discussion

Installing in a Proliant 6500

 
Ayman Altounji
Valued Contributor

Installing in a Proliant 6500

I have the controller installed in slot 5 and when I run System Configuration Utility it recognizes the controller as a "PCI Mass Storage Controller". I can run the Array Configuration Utility and create arrays and logical drives but I am unable to set the 5302 as my primary boot controller. My version of Smart Start is 4.80. ANyone have this problem? I assume there is an update .CFG file so the bios notices the card as a Smart Array.....HELP!!!

~steven
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: Installing in a Proliant 6500

Skip this question.

I got the machine to boot on the 4.81 disk that came with the controller..... Works like a charm.

~steven