Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Integrity with A6826A recognize zero length LUN of EVA4000

tommy_28
Frequent Advisor

Integrity with A6826A recognize zero length LUN of EVA4000

Hi ,

A HP customer is using rx5670 connecting to EVA4000(via A6826A to SAN switch), after we prepare everything follow SPOCK indicated, such as kernel version, HBA firmware, etc. Before present anything to host, the server recognized two 'zero size' LUNs in EFI util.

Do you know what's wrong here?

Thx.


efiutil> luns
A1-01:000 CNTL HP HSV210
A1-02:000 CNTL HP HSV210
A1-09:000 CNTL HP HSV210
A1-0A:000 CNTL HP HSV210
A1-0F:000 DISK HP HSV200 0 MB
A1-10:000 DISK HP HSV200 0 MB
A1 devices counted 6

efiutil> lun_attribs
A1-01:000
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:0 portid:10000 topology:FABRIC-P2P

A1-02:000
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:0 portid:10100 topology:FABRIC-P2P

A1-09:000
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:0 portid:10800 topology:FABRIC-P2P

A1-0A:000
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:0 portid:10900 topology:FABRIC-P2P

A1-0F:000
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:0 portid:20500 topology:FABRIC-P2P

A1-0F:001
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:1000000000000 portid:20500 topology:FABRIC-P2P

A1-10:000
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:0 portid:20600 topology:FABRIC-P2P

A1-10:001
FIRMWARE rev:3.03.150
CHIP rev:3
PCI busmode:PCIX-66MHZ
CONTROLLER loopid:FFFF portid:20E00
CONTROLLER wwpn:50060B0000327372 wwnn:50060B0000327373
SWITCH wwpn:200E00051E3575EB wwnn:100000051E3575EB
FIBRE frame size:2048 bytes link speed:2G/s topology:FABRIC-P2P
LUN number:1000000000000 portid:20600 topology:FABRIC-P2P


After OS bootup (rhel3u5), sth. like this happen:
# modprobe qla2300
scsi(4): Configure NVRAM parameters...
scsi(4): Verifying loaded RISC code...
scsi(4): Verifying chip...
scsi(5): Configure NVRAM parameters...
scsi(5): Verifying loaded RISC code...
scsi(5): Verifying chip...
qla2x00_test_active_port entered
qla2x00_test_active_port entered
qla2x00_test_active_port entered
qla2x00_test_active_port entered
qla2x00_test_active_port entered
qla2x00_test_active_port entered
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0 qla2x00_find_mp_dev_by_nodename could not find the node name
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0 qla2x00_find_mp_dev_by_nodename could not find the node name
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0 qla2x00_find_mp_dev_by_nodename could not find the node name
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
Firmware version: 3.03.11, Driver version 7.05.00p8-fo

Firmware version: 3.03.11, Driver version 7.05.00p8-fo

blk: queue e00000000056fbb0, I/O limit 17592186044415Mb (mask 0xffffffffffffffff)
Vendor: HP Model: HSV200 Rev: 5020
Type: Direct-Access ANSI SCSI revision: 05
blk: queue e00000000050d6b0, I/O limit 17592186044415Mb (mask 0xffffffffffffffff)
scsi: unknown type 12
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
blk: queue e00000000050d2b0, I/O limit 17592186044415Mb (mask 0xffffffffffffffff)
scsi: unknown type 12


Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
blk: queue e00000000050ceb0, I/O limit 17592186044415Mb (mask 0xffffffffffffffff)
scsi: unknown type 12
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
blk: queue e00000000050cab0, I/O limit 17592186044415Mb (mask 0xffffffffffffffff)
scsi: unknown type 12
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
blk: queue e00000000050c6b0, I/O limit 17592186044415Mb (mask 0xffffffffffffffff) Attached scsi disk sdc at scsi5, channel 0, id 0, lun 0 Attached scsi generic sg4 at scsi5, channel 0, id 2, lun 0, type 12 Attached scsi generic sg5 at scsi5, channel 0, id 3, lun 0, type 12 Attached scsi generic sg6 at scsi5, channel 0, id 4, lun 0, type 12 Attached scsi generic sg7 at scsi5, channel 0, id 5, lun 0, type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
SCSI device sdc: 1 512-byte hdwr sectors (0 MB) I/O error: dev 08:20, sector 0 I/O error: dev 08:20, sector 0 I/O error: dev 08:20, sector 0 I/O error: dev 08:20, sector 0 unable to read partition table
[root@rx5670-6 network-scripts]# qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0
qla2x00_combine_by_lunid: Found a controller path 0x0 - lun 0



my qla2300 options are:

options qla2300 ql2xmaxqdepth=16 qlport_down_retry=30 qlogin_retry_count=16 ql2xfailover=1 ql2xlbType=1

# cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: HP 73.4G Model: ST373453LC Rev: HPC3
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 03 Lun: 00
Vendor: HP Model: DVD-ROM 305 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: HP 36.4G Model: ST336753LC Rev: HPC3
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: HSV200 Rev: 5020
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 02 Lun: 00
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 03 Lun: 00
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 04 Lun: 00
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 05 Lun: 00
Vendor: HP Model: HSV210 Rev: 5020
Type: Unknown ANSI SCSI revision: 05


# cat /proc/scsi/qla2300/5
QLogic PCI to Fibre Channel Host Adapter for HP A6826-60001 :
Firmware version: 3.03.11, Driver version 7.05.00p8-fo
1 REPLY
Vincent Fleming
Honored Contributor

Re: Integrity with A6826A recognize zero length LUN of EVA4000

That's normal - it's the management LUN for the controllers.
No matter where you go, there you are.