Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

KZPCC Battery calibration time

KZPCC Battery calibration time

Hi,

I have just installed a KZPCC 3-port RAID controller with a new battery. The controller shows a status of Battery calibration taking place.

It has been like this for in excess of 60 hours. The documentation does indicate that it may take a long time. Is this time excessive ? There are no errors in the error log. Is there any reason that it may take so long ?

With regards
Andrew
3 REPLIES
JohnWRuffo
Honored Contributor

Re: KZPCC Battery calibration time

Andrew:

24 to 48 hours would be the time expected to get full charge from completely discharged.

One thing, to charge and complete the normalization process, you have to actually have I/O on the controller. The Calibration will not even start until there is I/O on the controller. (even performing a format on the logical drive from the O/S will start this)
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Eduardo E. Silva
Occasional Advisor

Re: KZPCC Battery calibration time

Andrew, I need to reinstalled mi KZPCC, but lost the boot disks. WOuld you be kind enough to send email a copy of the disks contents ?

Or...an URL at HP site where I can download these drivers...

TIA!!

Ed Silva
esilva@silvex.com

Re: KZPCC Battery calibration time