MDS600 firmware update from a Proliant system?

[BDay]

How does one go about upgrading the firmware on an MDS600 which is directly connected to a Proliant DL360 G6 system running Windows Server 2008 R2 Enterprise?

All I see are options/downloads for upgrading it through VSM for a blade solution or Integrity solutions.

Thank you in advance.

[cnb · Accepted solution]

Use the latest Firmware Maintenance CD or Smart Update Firmware DVD for direct attached configurations.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=3936271&swItem=MTX-65ae5187e33f42579fd8de67b8&prodNameId=3936272&swEnvOID=4064&swLang=13&taskId=135&mode=4&idx=1

Release Notes:
"Important:


This component supports the HP StorageWorks MDS600 when cabled to the HP Smart Array P411 or HP Smart Array P212 direct attached storage solutions. This component also supports HP StorageWorks MDS600 when cabled to the HP StorageWorks ExDS 9100 shared storage solution."


http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=1844067&swItem=MTX-a19395c04214462c8d5a7c3058&prodNameId=1844068&swEnvOID=1005&swLang=13&taskId=135&mode=5


Rgds,

[BDay]

Excellent thank you, I'll give that a shot. I see a new 9.0 firmware DVD was just released too.

[cnb]

Maybe take some time to assign?

have assigned points to 2 of 17 responses to my questions.

Best Regards,

[BDay]

Done! :)