cancel
Showing results for 
Search instead for 
Did you mean: 

MSA 1500

EnriquePhoenix_1
Occasional Visitor

MSA 1500

Can somebody tell me the CLI command for finding out my interconnect speed. What would also be great is a link to a complete reference guide to cli and the interconnect.
5 REPLIES
IBaltay
Honored Contributor

Re: MSA 1500

EnriquePhoenix_1
Occasional Visitor

Re: MSA 1500

Thx, I have that guide but could not find what I was looking for.
Uwe Zessin
Honored Contributor

Re: MSA 1500

I've looked at the output of an MSA1500cs with version 7.00 firmware and that information was not visible. Maybe in 7.10 - maybe not.
Honestly, I think it is not that important, because it is either 1 GBit/sec or 2 GBit/sec. On a modern switch you should lock the speed at 2GBit to prevent wrong auto-negotiations.
.
EnriquePhoenix_1
Occasional Visitor

Re: MSA 1500

yeah, I was just trying to verify that my MSA was set to 2GB.
Chris Rosan2
Frequent Advisor

Re: MSA 1500

I would think you should check what speed the switch port that the MSA is connected to, and if it's not the speed you "want" it to be, check that the SFP is the right speed.