Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA 2321fc Controller A is bad. How to replace

SOLVED
Go to solution
ILYA GALDIN
Occasional Contributor

MSA 2321fc Controller A is bad. How to replace

Hi.

I have dual-controller configuration. Controller A is bad and I must replace it. But "2000g2 modular smart array controller module replacement instruction" says: when replacing the controller A, configuration setting may be reset to the values of the replacement controller. No further recommendations... How to do backup configuration i cannot find (gui console). If there is a risk, what kind of fault tolerance in question?

Can you help me advice, how to replace controller A?

2 REPLIES
hvhari
HPE Pro

Re: MSA 2321fc Controller A is bad. How to replace

Did you try HP Guided Troubleshooting at www.hp.com/support/hpgt ?

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
ILYA GALDIN
Occasional Contributor
Solution

Re: MSA 2321fc Controller A is bad. How to replace

Hi

i have already replaced it. I replaced the controller A to the hot, without shutting down (it was not serviced). Configuration was not reset, but newest firmware was replicated from controller A to controller B. It was about 25 minutes.