HPE Community
Disk Enclosures
1753600 Members
6254 Online
108796 Solutions
New Discussion

MSA 2324SA LUNs are not showing in Windows

 
Thiyagarajan R
Occasional Contributor

‎04-30-2010 09:59 AM

‎04-30-2010 09:59 AM

MSA 2324SA LUNs are not showing in Windows

MSA 2324 SA - Configured Vdisks + Volumes and mapped to host using Provision wizard. From SMU all looks Ok. Not sure why it is not reflecting in Windows Disk management. SAS connections are all are proper. No SAS host HBA driver issue. I have tried reseting the Hosts ports from SMU as well. But no result. Can any help what went wrong
0 Kudos
Reply
1 REPLY 1
Marcus Schack
Trusted Contributor

‎05-03-2010 10:58 AM

‎05-03-2010 10:58 AM

Re: MSA 2324SA LUNs are not showing in Windows

Generally, it is a driver issue or a switch zoning issue. You need to ensure that you have zoned the MSA and the Windows server that you want it to present LUNs to. Also, make sure that you have loaded the appropriate MSA drivers and MPIO. Start with the zoning.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.