Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA-30DB with HP-UX

SOLVED
Go to solution

MSA-30DB with HP-UX

What is the command line to get into the software to modify the MSA-30DB configuration.
thanks
Just another HPUX Admin
4 REPLIES
Markus_10
Valued Contributor
Solution

Re: MSA-30DB with HP-UX

It is saconf and sautil when using a Smart Array Controller.

When using a normal SCSI Controller you use the lvm command line options

Regards
markus
Uwe Zessin
Honored Contributor

Re: MSA-30DB with HP-UX

The MSA30 DB is a simple disk drive enclosure (a JBOD in HP speak) with two SCSI busses, but without an embedded RAID controller. There is no command interface to change anything on the box itself.
.
Markus_10
Valued Contributor

Re: MSA-30DB with HP-UX

Hi Uwe ;-)

Not in the box - but in the smart arry ;-)))

Greets
Markus (CXO Event)
Uwe Zessin
Honored Contributor

Re: MSA-30DB with HP-UX

Hello Markus,
now I fully understand what you meant, thanks!
.