Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA p2000 g3 fc event:supercapacitor failure

Bruce Jamieson_1
Occasional Visitor

MSA p2000 g3 fc event:supercapacitor failure

Status: cell 4 voltage is too high (30), State: failure (12) (p2: 2804, p3: 0)
Has anybody ever seen this error? temps all look good; msa is functioning fine with no red lights.
Any comments appreciated. Cheers. BruceJ.
3 REPLIES
Uwe Zessin
Honored Contributor

Re: MSA p2000 g3 fc event:supercapacitor failure

I've seem a note on the G2, but I have not checked the MSA advisories for some time now.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01997290
.
Bruce Jamieson_1
Occasional Visitor

Re: MSA p2000 g3 fc event:supercapacitor failure

Thx Uwe. I have contacted HP Support on this one. Cheers

Re: MSA p2000 g3 fc event:supercapacitor failure

What did HP tell u the solution was?

 

We are having the same problem right now.