Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 and DS20E problem

Bruno Fraga
Occasional Visitor

MSA1000 and DS20E problem

Hello,

I have 2 DS20E connected to a MSA1000. They are sharing 4 volumes in the MSA1000, all valumes are avaiable in all DS20E, everybody can see everything in the array.
I can see all the files, but when i try to copy a file from one volume to another i can't access the new created file from the other machine, i can see the file, but i can delete it or make a dir/full in it.
Can anyone help me?
5 REPLIES
Uwe Zessin
Honored Contributor

Re: MSA1000 and DS20E problem

Did you configure an OpenVMS cluster?
Without clustering software, this DOES NOT work reliable -
you do corrupt your file systems!!
.
Bruno Fraga
Occasional Visitor

Re: MSA1000 and DS20E problem

No...the computers are not in a VMSCluster.
Bruno Fraga
Occasional Visitor

Re: MSA1000 and DS20E problem

Is there another way to do this without cluster?
Uwe Zessin
Honored Contributor

Re: MSA1000 and DS20E problem

Use a network protocol (DECnet, TCP/IP) to transfer files between the servers.
.
Bruno Fraga
Occasional Visitor

Re: MSA1000 and DS20E problem

I tryed to use both...i tryed to transfer using FTP and copy with decnet, both of then give me the same error.
I think that the problem may be in the mount command os the disks, but i have tried all options that i know.