MSA1000 login and password

[Steve Coleman_1]

I have an MSA1000 that I am configuraing. I need the default login and password for the MSA1000 through the switch.

I could connect to the CLI very well

[C. Beerse]

If you mean access using the `acu` from the (one) connected host, you need the uid and password you gave durint setup of the HP tools on the host. The uid-s you can choose are "administrator", "operator" or "user". During install I gave "Administrator" the root password.

If the host is running linux, start `cpqacuxe` from a prompt (if you need remote access, use `cpqacuxe -R`). Then point your webbrowser to http://host:2301 or https://host:2381/.